Putty/WinSCP Configuration for connecting RICT Device with PC/Laptop through ethernet

Connect RICT with Putty/WinSCP in PC/Laptop through LAN Cable

Following three (3) software are required to make control on DARPAN Device from PC/Laptop.

i) PUTTY.EXE

ii) WinSCP.exe

iii) VNC-Viewer-5.1.0-Windows-32bit.exe

Google Drive link for downloading Putty software:

https://drive.google.com/open?id=139mmVjhrcQcGOBgVTcf95dAPDiEA1Wnw

After downloading all the files copy the files and paste into one Folder for frequent use. Configuration to connect Device with PC/Laptop:

1) Set your PC/Laptop IP as following:

In General, other than 192.168.1.1 in the series of 192.168.1.2 to 192.168.1.255 is acceptable and recommended. No need to configure DNS Server Details.

2) Putty Settings:

• Double Click on Putty
• Set your host name or IP address(RICT Device) as following and save with your name (write your name in saved sessions)
• Then open putty with the saved profile (your Name or any other if any)

3. WinScp settings

• Double click on WinScp software
• Set host name as following; user name will be root; password remained blank; select File protocol as SCP and save. Save the session as your Name. Then open WinScp with the saved profile according to needs (your Name or any other if any)

DOWNLOAD PuTTY SOFTWARE

DOWNLOAD WINSCP SOFTWARE